Replacing a Purell soap dispenser might seem like a daunting task, but with the right guidance, it can be a straightforward and hassle-free process. Whether you're upgrading an old unit or simply need to replace a malfunctioning one, this step-by-step guide will walk you through everything you need to know.
Preparation: Gathering the Necessary Tools and Materials
Before you begin, it's essential to gather all the tools and materials you'll need for the replacement process. This will save you time and ensure that you have everything on hand to complete the task efficiently.
- Screwdriver: Depending on the model of your soap dispenser, you may need a Phillips or flathead screwdriver.
- Replacement Soap Dispenser: Ensure that the new dispenser is compatible with your existing setup.
- Cleaning Supplies: Have a cloth and mild cleaning solution ready to clean the area before installing the new dispenser.
- Measuring Tape: Useful for ensuring that the new dispenser is installed at the correct height and position.
Step 1: Removing the Old Soap Dispenser
The first step in replacing your Purell soap dispenser is to remove the old unit. Follow these steps to ensure a smooth removal process:
- Turn Off the Power: If your soap dispenser is electrically powered, make sure to turn off the power supply before starting.
- Empty the Soap Dispenser: Remove any remaining soap from the dispenser to avoid spills during the removal process.
- Detach the Dispenser: Use a screwdriver to remove any screws or fasteners holding the dispenser in place. Carefully detach the dispenser from the wall or countertop.
- Disconnect Any Hoses or Tubes: If your dispenser is connected to a soap reservoir or water supply, disconnect any hoses or tubes carefully.
Step 2: Cleaning the Installation Area
Once the old dispenser has been removed, it's important to clean the installation area thoroughly. This will ensure that the new dispenser adheres properly and functions efficiently.
- Wipe Down the Surface: Use a cloth and mild cleaning solution to wipe down the area where the old dispenser was installed.
- Remove Any Residue: If there is any adhesive residue left behind, use a suitable cleaner to remove it completely.
- Allow the Area to Dry: Ensure that the area is completely dry before proceeding with the installation of the new dispenser.
Step 3: Installing the New Soap Dispenser
With the old dispenser removed and the area cleaned, you're now ready to install the new Purell soap dispenser. Follow these steps for a successful installation:
- Position the New Dispenser: Hold the new dispenser in place and use a measuring tape to ensure it is positioned correctly.
- Mark the Installation Points: Use a pencil to mark the spots where screws or fasteners will be installed.
- Secure the Dispenser: Use a screwdriver to secure the dispenser in place, ensuring that it is firmly attached to the wall or countertop.
- Connect Any Hoses or Tubes: If your new dispenser requires a connection to a soap reservoir or water supply, carefully connect the necessary hoses or tubes.
- Turn On the Power: If your dispenser is electrically powered, turn the power supply back on and test the unit to ensure it is functioning correctly.
Step 4: Testing and Final Adjustments
After installing the new soap dispenser, it's important to test it and make any necessary adjustments to ensure optimal performance.
- Test the Dispenser: Press the dispenser lever or sensor to ensure that soap is dispensed correctly.
- Check for Leaks: Inspect the dispenser and any connected hoses or tubes for leaks. Tighten any connections if necessary.
- Adjust the Soap Flow: Some dispensers allow you to adjust the amount of soap dispensed. Make any necessary adjustments to suit your preferences.
- Clean Up: Wipe down the dispenser and surrounding area to remove any fingerprints or soap residue.
Maintenance Tips for Your New Soap Dispenser
To ensure that your new Purell soap dispenser continues to function efficiently, regular maintenance is key. Here are some tips to keep your dispenser in top condition:
- Regular Cleaning: Clean the exterior of the dispenser regularly to prevent the buildup of dirt and grime.
- Refill Promptly: Keep an eye on the soap level and refill the dispenser promptly to avoid running out of soap.
- Check for Blockages: Periodically check the dispenser nozzle for blockages and clean it if necessary.
- Inspect Connections: Regularly inspect any hoses or tubes connected to the dispenser for wear and tear, and replace them if needed.
Replacing a Purell soap dispenser doesn't have to be a complicated task. By following this step-by-step guide, you can ensure a smooth and efficient replacement process. With the right tools, preparation, and maintenance, your new soap dispenser will provide reliable and hygienic hand cleaning for years to come.
